"AP STATE AWARD OF THE YEAR 2018"
Madanapalli Institute of Technology & Science
Chittoor, Andhra Pradesh
Anonymous | Rating  4
Recommends this college
Madanapalle Institute of Technology & Science is established in 1998 in the picturesque and pleasant environs of Madanapalle and is ideally located on a sprawling 26.17 acre campus on Madanapalle - Anantapur Highway (NH-205) near Angallu, about 10km away from Madanapalle. MITS, originated under the auspices of Ratakonda Ranga Reddy Educational Academy under the proactive leadership of Sri. N. Krishna Kumar M.S. (U.S.A), President and Dr. N. Vijaya Bhaskar Choudary, Ph.D., Secretary & Correspondent of the Academy. MITS is governed by a progressive management that never rests on laurels and has been striving conscientiously to develop it as one of the best centers of Academic Excellence in India. The Institution's profile is firmly based on strategies and action plans that match changing demands of the nation and the students fraternity. MITS enjoys constant support and patronage of NRI's with distinguished academic traditions and vast experience in Engineering & Technology. 50 students were selected for Surya Tech Solutions, On Campus Drive held on 29th March, 2019. 09 students were selected for HCL Technologies Ltd, On Campus Drive held on 25th March, 2019. 16 students were selected for Mindtree On Campus Drive held on 02nd March, 2019. 92 students were selected for Cognizant Technology Solutions, on Campus Drive held on 24th February, 2019. 34 students were selected for Infosys - On Campus Recruitment Event held on 22nd February 2019. 15 students were selected for Muthoot Finance, On Campus Drive held on 18th January, 2019. 09 students were selected for NTT DATA Interviews held on 07th January, 2019. 02 students were selected for Musigma Interviews held on 22nd December, 2018. 40 students were selected for Wipro Ltd, On Campus Drive held on 18th December, 2018. 31 students were selected for Ojas Innovative Technologies, On Campus Drive held on 14th December, 2018. 39 students were selected for Angel Broking Pvt Ltd Interviews held on 30th November, 2018. 22 students were selected for L & T Technologies in Campus Drive held on 18th October 2018. 11 students were selected for Hexaware Technologies, Bangalore On Campus Drive held on 19th September, 2018. 06 students were selected for GGK Technologies, On Campus Drive held on 16th August,2018. 16 students were selected for Knowledge Lens Pvt Ltd, Campus Drive held on 24th July 2018.
Infrastructure 3.5
Campus 5
Faculty 5
Industry Exposure 5
Placements 4
Affordability 5
Campus Facilities: Separate hostel facilities are provided for Boys and Girls in the college campus. It has adequate high security and good discipline. Each room has an attached bathroom. The students who are not staying with the parents shall reside in the college hostel as per college rules. The canteen of the college provides food in the hostel also. There's no such thing as automated food delivery. It takes the best, the brightest and the most caring people to deliver Canteen's delicious food, superior service and innovative dining solutions. FOOD STYLES Vegetarian Non-Vegetarian North-Indian South-India This college has an excellent teaching faculty with highly qualified and well experienced staff. The teacher student ratio is maintained at 1:10. All teachers are full time and the students are given special attention in their studies. The excellent results in the university examination is due to dedicated, constant effort by staff. The teaching aids used by the staff are modern and helps the students to learn the subject thoroughly. Parents teachers meeting is held periodically after each internal test and students performance is furnished to the parents directly. The interventions of Information Technology has provided a great gap in the case of Library automation services. The Library is computerized with all the features of library management system. The library also maintains e-books for students and it has the digital library facility for all the students with the internet connection.
Campus Life: First, my experience in college has given me a chance to sharpen my skills in my field of choice. There have been, and there will continue to be, many opportunities to learn more ways of improving my craft as a result of my time in school, which I am truly thankful for. For example, the Writing Center at my school has taught me many writing tips and rules that I was unaware even existed, and would still be unaware of had it not been a part of my experience. Because of this, I realized I still had a lot to learn despite what I thought; but this allows me to improve my skills more as I continue to attend school and also gives me more confidence in my area. And as a result, I know one day this valuable experience will help me in my search for another one-a rewarding career. In addition to learning practical skills, being in college has also taught me a lot about social sciences such as sociology and history. For instance, I have had the privilege of learning about religions in unfamiliar parts of the world, such as Buddhism and Islam, that I had no knowledge of beforehand. From this experience, I have learned many interesting things about the cultures in which these religions are typically followed. Learning about many different religious ideas and practices in other areas of the world, like meditation, reincarnation, and the worshipping of multiple deities, has been valuable to me because it has cleared up some misconceptions I had, thus allowing me to be less ignorant on the topic. It has also given me a better understanding of others’ beliefs and traditions, no matter what region of the world they originated. This has made my time in college much more enriching and worthwhile.
Faculty: One Day workshop on Creating Road map for Innovation and Incubation Centres in AP Educational Institutions, organized by ITE&C department on 19-10-2016 at Gateway Hotel in Vijayawada. A workshop on “Quality Initiatives in Technical & Higher Educational Institutions (in compliance with NBA & NAAC Accreditation)” organized by Engineering Staff College of India (ESCI), Hyderabad, from 07-09-16 to 9-09-16. 3rd International Conference in Transformations in Engineering Education (ICTIEE 2016) was organized by IUCEE (Indo-US Collaboration for Engineering Education) and College of Engineering, Pune (COEP) during 08-12 January 2016. An Orientation Session on “Siemens Centres of Excellence (COE) Clusters in AP” organized by Andhra Pradesh State Skill Development Corporation at the Sri City Business Centre, Sri City on 27th August 2015. A one-day workshop on “Awareness on Various programs for Foreign University Collaborations” was Organized at JNTUA, Ananthapuramu on 16th May 2015. A meet in Chennai conducted by Higher Education Forum, South Zone to receive Campus Preparedness Award 2015 on 26th March 2015. A workshop on TEQIP-II : Good Governance, Leadership and Management on 14th - 15th October 2014 at Metropolitan Hotel, Near Bangla Sahib Gurudwara Road, New Delhi. Represented the college for the workshop on Procurement Practices attended on 22.08.2014, at PSG Institute of Technology, organized by PSG, SPFU-TN and NPIU at Coimbatore. Attended a National Conference on “Leadership in Higher Education” held on July 4, 2014 at Engineering staff college of India (ESCI), Hyderabad. One day workshop on “Academia Industry Management For creating Sustainable Employability” held on 06-04-2014 Organized by GP Birla Institute of Human Excellence, Birla Center, Hyderabad. Participated in a Seminar on “Innovative Teaching, Research Learning & Accreditation Practices” (IE-ITR SESSION) organized by ESCI as the constituent part of IE(I) Congress-2013 on 21 December, 2013 at Hotel Leela Palace, Chennai. Appointed as the co ordinator of the program by AICTE and received a grant from AICTE to conduct 2 Weeks FDP On Fatigue & Fracture Mechanics In FE Analysis. A Two Day Workshop on “Recent Trends In Manufacturing “ Under TEQIP-II Organised by the Department of Mechanical Engineering, Chaitanya Bharathi Institute of Technology, Gandipet, Hyderabad on 29-30 July 2013. A Two Day Workshop on “Procurement Guidelines & PMSS Training" under TEQIP-II conducted by NPIU - New Delhi and SPFU Andhra Pradesh at University College of engineering, Osmania University, Hyderabad on 16-17 May 2013. “A Study of Transition Wear Behavior of Alumina Particle Reinforced Al6061 MMCs” Published in the Journal of Reinforced Plastics and Composites, Vol.28,No.23/2009, SAGE Publications 2009, London and Also this journal paper is available in the website jrp.sagepub.com, by Dr.C.Yuvaraj. “Optimization of Machinability Parameters of Aluminium/Alumina Metal Matrix Composites” Published in the International Journal of Applied Engineering and Research, ISSN 0973-4562 Volume 3, Number 9 (2008), pp.1197-1203, Research India Publications, by Dr. C. Yuvaraj. “Study on Transition Behaviour of Al/Al2O3 MMCs” Published in the special issue of World Journal of Engineering, ISSN: 1708 – 5284, Volume.5, Number.4 (2008), pp.543-544, Sun Light Publishing, Canada, by Dr.C.Yuvaraj. “Effect of Thermal Fatigue Behaviour on Bending strength of Al/Al2O3 MMCs” Published in the International Journal of Applied Engineering and Research, ISSN 0973-4562 Volume 5, Number 7 (2010), pp. 1197-1202, Research India Publications, by Dr. C. Yuvaraj. “Effect of Drilling Parameters on Drillability Behaviour of Al/Al2O3 MMCs” Published in the International Journal of Applied Engineering and Research, ISSN 0973-4562 Volume 5, Number 7 (2010), pp. 1203-1213, Research India Publications, by Dr. C. Yuvaraj. One Day workshop (28 September,2012) on “Metallurgy For Non-Metallurgists” (MNM-2012) organised by Indian Institute of Metals, Hyderabad Chapter on 28th September 2012. Principal Investigator for the project “DEVELOPMENT OF HIGH STRENGTH MATERIALS FOR Micro Air Vehicle STRUCTURES “. Participated in an interactive session with Dr. U. Chandrasekhar, Director, ESCI & Gp Capt B.S. Phillora, Head Management , Technology & Information Divisions, Engineering Staff College of India at Hyderabad on 14th December 2013. Dr. Suryanarayana Raju Pakalapati Visited Nagarjuna Fertilizers and Chemicals Limited (NFCL) Hyderabad on 26 - 27 August 2015. Visited Rayalaseema Thermal Power Plant (RTPP), Muddanur, Kadapa Dist on 28th July 2015. Participated in Technical Discussion at BHEL, R&D, ARCI and BAG organizations during 20-26 July 2015. The principal objective of the visit was to explore feasibility of seeking Project works for the M.Tech students and Research project for the MITS faculty. Visited Central Institute of Tool Design (CITD), Hyderabad on 21st November 2014. Attended an exclusive event at CII-Sohrabji Godrej Green Business Center in Hyderabad where elite US scientist and environmentalist Mr. Amory B Lovins delivered a keynote lecture on 12th July, 2014. Dr. Prasanna Kumar Lakshmi Duvvi A Two-Day National Summit on Quality in Education from 18-11-16 to 19-11-2016 organized by CII – Confederation of Indian Industry at CII Institute of Quality, Bengaluru. Dr. Senthil Kumaar J S The two day summit on Waste Management - Resource Management for Sustainable future was organized by the CII - Sohrabji Godrej Green Business Centre at Bangalore on 23-24 November 2017. A Two-day workshop on Restructuring and Redesigning the Higher Education Curriculum to Meet Industry Needs organized by CII Southern Region at Jeppiaar Engineering College, Chennai, during 23 - 24 August 2017. Dr. S. Thamizhmanii Visited M/S Murugappa Group and M/s Rane (Madras) Group on 15.12.2017 at Chennai. Visited TI Metal Forming Ltd.in Tirunindravur, Chennai and TIDC India Ltd. at Ambattur, Chennai 53 on 16.12.2017. Dr. G. Harinath Gowd Management Capacity Enhancement Programme for the 11th batch from 12th January to 18th January 2015 at Indian Institute of Management, Indore, Madhya Pradesh. 2-Day "Workshop on Avoiding Plagiarism" organized by Shri Dharmasthala Manjunatheshwara Institute for Management Development (SDMIMD), Mysore, 3rd & 4th July 2014. ”Synthesis and characterization of Hardwickia binata fiber with epoxy” in a Three day International Mechanical Engineering Congress 2014 (IMEC 2014) organized by the Department of Mechanical Engineering NIT ,Tiruchirappalli, Tamil Nadu, India during 13-15 June 2014. ” Modelling & Analysis of End Milling Process parameters using Artificial Neural Networks” in a Three day International Mechanical Engineering Congress 2014 (IMEC 2014) organized by the Department of Mechanical Engineering NIT, Tiruchirappalli, Tamil Nadu, India during 13-15 June 2014. ” Experimental Investigations & Effects of Cutting Variables on MRR and Tool Wear for AISI S2 Tool Steel” in a Three day International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014) organized by the Department of Mechanical Engineering NITK Surathkal from March 27/03/2014 to 29/03/2014. Participated in a Two Day Conclave on Quality Technical Education and Research Organized by Dept. of Mechanical and Aerospace Engineering, IIT Hyderabad campus on 7th and 8th March, 2014. Appointed as Reviewers for International Journal For Technology Enhancements and Emerging Engineering Research (IJTEEE). ”Modelling & Analysis of performance characteristics of Wire EDM of SS304” in an International Journal of Innovative Technology and Exploring Engineering (IJITEE),ISSN: 2278-3075, Volume-3, Issue-4, September 2013,pp:122-125. “A GA approach to the optimization of Laser Beam Welding” in an International Journal of published by German publisher LAP (Lambert Academic Publishing),ISBN-13:978-3-659-32090-3,ISBN-10: 3659320900,EAN: 9783659320903,Book language: English. “Empirical Modelling of weld bead geometry in Nd:YAG laser welding of Inconel 600 using genetic programming” in International Conference on INTELLIGENT MANUFACTURING SYSTEMS (ICIMS 2012) Organized by School of Mechanical Engineering, SASTRA University,Thanjavur Tamil Nadu,India. “Empirical Modelling of Hard Turning process of Inconel using Response Surface Methodology” in an International Journal of EMERGING TECHNOLOGY AND ADVANCED ENGINEERING. (ISSN 2250-2459, Volume 2, Issue 10, October 2012). “A Genetic Algorithm Approach to the Optimization Of Process Parameters In Laser Beam Welding"in an International Journal of Mechanical Engineering and Technology Volume 3, Issue 3, December (2012), pp. 459-470. ISSN 0976 – 6340 (Print), ISSN 0976 – 6359. ”Optimal Design for Laser Beam Butt Welding Process Parameter for Inconel Using Artificial Neural Networks” in an International Journal of Emerging Technology and Advanced Engineering, ISSN 2250-2459, ISO 9001:2008 Certified Journal, Volume 3, Issue 4, April 2013. “Experimental Investigations on the effect of Cutting Variables on the material removal rate and tool wear for AISI SI Steel” in the Indian Journal of Applied Research, ISSN -2249-555X, Volume 3, Issue 5, Pp:211-213,May 2013. “Modelling and Analysis of FSAE Car disc Brake using FEM" in The International Journal of Emerging Technology and Advanced Engineering (IJETAE), ISSN 2250-2459, ISO 9001:2008 Certified Journal, Volume 3, Issue 9, September 2013,pp-383-389. "Effect of Process Parameters on the Bead Geometry of Laser Beam Welded Inconel Sheets" in an International Journal of Advanced Manufacturing Systems , ISSN : 2229-5860 , Vol.4, No.1(June-2013),Pp: 29-41. “Prediction & Optimization of End Milling Process Parameters Using Artificial Neural Networks" in The International Journal of Emerging Technology and Advanced Engineering (IJETAE), ISSN 2250-2459, ISO 9001:2008 Certified Journal, Volume 3, Issue 9, September 2013,pp-117-122. Dr. Uday Krishna Ravella Participated in 5 Day Workshop on “NBA & NAAC Accreditation Process” Sponsored by AICTE under Margadarshana Scheme at M S Ramaiah Institute of Technology, Bengaluru on 10th Dec - 14th Dec 2018. Dr. S. Baskaran One Week Workshop on Advanced Materials & Manufacturing Methods Conducted by Department of MME, NIT, Trichy, Tamilnadu on 6 - 10 June 2016. Dr. I. Arun A Two-Day Workshop on Patent Information Cell Organized by Sri Padmavathi Mahila Visvavidyalayam (Womens University), Tirupati on 30 - 31 March 2016 Dr. G. Sada Siva Prasad 7 days training programme on “Training on Management Capacity Enhancement (Batch 8) for Administrators” organized by IIM Indore with NPIU during March 20 - 26, 2014, under TEQIP II program. Dr. G. Mallikarjunachari Participated in 15th International Conference on Polymer Science and Technology & Delivering Scientific Talk in the SPSI MACRO 2018 Conference in IISER-Pune and CSIR-NCL Pune in Maharashtra on 19 - 22 December 2018. Dr. R. Prithivi Rajan Visited to Bangalore Integrated System Solutions (BISS) & Central Manufacturing Technology Institute (CMTI), Bangalore on 15th November 2018. Dr. K. V. Nagesha Visited to Rayalaseema Thermal Power Project on 3rd November 2018. Dr. P. Naresh Visited to Bangalore Integrated System Solutions (BISS) & Central Manufacturing Technology Institute (CMTI), Bangalore on 15th November 2018. Dr. Muralidhar Singh. M Participated in One Day ICTIEE 2019 ‘Engineering Education Research’ at Malla Reddy Engineering College, Hyderabad on January 06, 2019. Dr. Vishwanatha H M Participated in “Dynamic Response of Advanced Composites” One week GIAN course (171034L01) at National Institute of Technology Karnataka, Surathkal on December 10 - 14, 2018. Dr. Shanker Nath Participated in International Conference on Nanoscience and Nanotechnology (ICONN) at SRM Institute of Science and Technology Kattankulathur, Tamilnadu on 28 - 30 January 2019. Participated in National Conference on Physics and Chemistry of Materials (NCPCM - 2018) on 27 - 28 December 2018. Dr. Srijan Sengupta Visited to Indian Institute of Science (Bangalore) on 28 December 2018. Visited to KIADB Hoskote Industrial Area, Bangalore on 6th December 2018. Mr. V. Vamsidhar A Two Day International Conference on “Conversations for Advancing “Digital India” and “Make in India” - “Digital Bharat 2015” organized by FICCI at FICCI, Federation House, New Delhi from 14th May to 15th May 2015. The Confederation of Indian Industry (CII) organized the tenth edition of its “India Innovation Summit”, on 8th & 9th August 2014 at Hotel ITC Royal Gardenia in Bangalore. Participated in the Second World Summit on Accreditation – WOSA-2014 on the theme "International Recognition of Educational Qualifications" organized by National Board of Accreditation during 8-10 March 2014 at Hotel Ashok, New Delhi. A five day training program at Chandigarh from 16-12-13 to 20-12-13. The training is called Pedagogical Training (Module-I) and was conducted by Department of Education and Educational Management from National Institute of Technical Teachers’ Training and Research(NITTTR), Chandigarh. “CII’s higher education conclave” organized by The Confederation of Indian Industry (CII) held at Hotel Le Meridien, Coimbatore on Nov. 29, 30, 2013. The theme of the conclave is Transformational Change in Higher Education: Global Excellence through Governance, Research and Innovation. “Investigations in a locally developed insulated DI diesel engine with newly developed lubricants ”, technology World, an International journal, International Journal Division, F 22, Jalan Gempita 9, Taman Salak south, 57100 Kuala Lumpur, Malaysia, Volume: II, Issue-II, July-August-2010, ISSN 2180-0987, Pp:191-198. “Synthesis Comparative Analysis of IDI Diesel Engine Combustion and Emission Parameters Fuelled with Ethanol and its Diesel Blends” Paper published in Bonfring International Journal in an International Conference on Challenges and Opportunities in Mechanical Engineering, Industrial Engineering and Management Studies 2012,Pages : 635-639, Paper ID : MET17.
Placements: 50 students were selected for Surya Tech Solutions, On Campus Drive held on 29th March, 2019. 09 students were selected for HCL Technologies Ltd, On Campus Drive held on 25th March, 2019. 16 students were selected for Mindtree On Campus Drive held on 02nd March, 2019. 92 students were selected for Cognizant Technology Solutions, on Campus Drive held on 24th February, 2019. 34 students were selected for Infosys - On Campus Recruitment Event held on 22nd February 2019. 15 students were selected for Muthoot Finance, On Campus Drive held on 18th January, 2019. 09 students were selected for NTT DATA Interviews held on 07th January, 2019. 02 students were selected for Musigma Interviews held on 22nd December, 2018. 40 students were selected for Wipro Ltd, On Campus Drive held on 18th December, 2018. 31 students were selected for Ojas Innovative Technologies, On Campus Drive held on 14th December, 2018. 39 students were selected for Angel Broking Pvt Ltd Interviews held on 30th November, 2018. 22 students were selected for L & T Technologies in Campus Drive held on 18th October 2018. 11 students were selected for Hexaware Technologies, Bangalore On Campus Drive held on 19th September, 2018. 06 students were selected for GGK Technologies, On Campus Drive held on 16th August,2018. 16 students were selected for Knowledge Lens Pvt Ltd, Campus Drive held on 24th July 2018.
Salary Package: Less than 2.5 Lakhs
Safety Measures: Anti-Ragging Cell
Posted On: 21-Aug-2019